Shenzhen Zhonghu Automation Equipment Co., Ltd.

Consulting Hotline0755-2728-6106

Phone number13312911695

Waterproof power supply fillin

Contact us

Consulting Hotline:0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen
  • ZHU-20D Transformer filling machine

ZHU-20D Transformer filling machine

Category:Waterproof power supply fillin

Description:

Hotline:0755-2728-6106

PurchasingConsultation

  • Introduction
  • Parameter

| Application: 

Waterproof transformers, waterproof motor coils, drive power, arrester, resistors and other fillers glue glue


| Principle of operation:

1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, Z axis up and down movement with ball shaft screw rapid response.
6, glue machine automatic ratio

 

| Parameters:

1

    Proportion with glue

   3: 1~1:1 adjustable between 1 and any fixed proportion

2

    Mixing method

   Dynamic mixing (servo motor)

3

    Machine travel

   680*680*30mm

4

    Counter tops

 table 1050*900,The effective working area 680*680mm,Two sets of positioning blocks can be adjusted with the fixture

5

    Programming mode

    Teaching programming

6

    Dimensions

     1220*1050*1500MM

7

    A pump

    Screw pump: wear-resistant, suitable for additives glue (China-German joint venture)

8

    B pump

     Gear pump

9

    Glue power

     Bujin motor

10

    Tank Capacity

     A Cylinder 25L with thermostat,B Cylinder 10L

11

    A plastic tube

     A tube with thermostat

12

    A plastic flow

     2-10g/s

13

    A plastic head

    Number of head according to the product

14

    Input pressure

     0。5-0。7Mpa

15

    Machine power

     1500W

16

    Supply voltage

     AC220V±10%,50-60HZ

                                       

| Device Configuration:

1

     Control System

    Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen

2

     Software system

    Zhonghu R&D independently

3

     Bujin motor

 YAKO Original motor

4

     Metering pump body

 Taiwan Precision adjustment wear type

5

     Cut off the system

 Zhonghu R&D independently

6

     Mixing device

 Zhonghu R&D independently

7

    Stirring motor

 OUTAI

8

     Frame material

 A3*3mm manufacture

9

    Barrel thermostat

    Silicone heaters
10

    Rubber thermostat

    The whole pipe thermostat heating wire

11

     Sliding device

 Taiwan HIWIN


| Features:

1

Friendly and concise interface

Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes

2

High-end imported electronic control system

The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron.
Using the Xinjie PLC
All motors are overload protected.
Using high-precision motion control system

3

Glue detection feedback function 

The drum part is equipped with low level alarm function, timely remind the glue to add

4

Glue filter four protection

Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline

5

Large work surface

Machine points around two, respectively, put two materials, the machine automatically continuous operation, with more efficient

6

Equipment running more smoothly

The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy

7

High precision mechanical pump body

Little fine solid particles in the glue is allowed

8

Automatic mechanical agitation

AB glue mixed with dynamic, mechanical mixing, speed 0-3000rpm adjustable

9

High precision operation

The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations


| Characteristics of Three-axis Movement:

1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.


| Main features of machine

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, easy to clean, AB glue mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts do not have to clean, if the get off work or to stop for a period of time only filling the mixing tube to take off, Clean on the line, supplies only mixing tube.
6, applicable to a wide range of industries.


| Application industry:
China's photoelectric display industry, the rapid development of drive power, transformers, resistors as an important part of photoelectric display, with its unique performance of the glue at low temperatures, poor mobility, to the work with a great deal of trouble. But the traditional practice of the general problems encountered are:
1. rely on manual operation ratio and mixing precision difficult to control, easy to proportional deviation, uneven mixing
2. Production operation is difficult to control the flow of artificial irrigation, irrigation volume is inconsistent.
3. Product quality consistency is poor, the production process can not control factors, the quality of each batch of product ups and downs.
4. artificial irrigation glue waste glue, irrigation area poor health.



Order:ZHU-20D Transformer filling machine

  • linkman
  • phone
  • email
  • verifyCode
  • Scan, focus on us

快三平台 快三平台 快三平台 恒彩彩票 快三平台 状元彩票 快赢彩票 状元彩票 快三平台 恒彩彩票