Shenzhen Zhonghu Automation Equipment Co., Ltd.

Consulting Hotline0755-2728-6106

Phone number13312911695

Vacuum filling machine

Contact us

Consulting Hotline:0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen
  • ZHU-40-30 vacuum filling machine

ZHU-40-30 vacuum filling machine

Category:Vacuum filling machine

Description:

Hotline:0755-2728-6106

PurchasingConsultation

  • Introduction
  • Parameter

| Application:

The glue is very strict after the control of the gas and the requirements of the product in the vacuum state of plastic filling


| Principle of operation:

1, the program editor: just enter the product line spacing, the number of rows, the number of cases, the number of cases can be.
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4. motion trajectory: straight line
5. Z-axis lift: cylinder lift (up and down two bits)


| Parameters:

1

    Proportion with glue

   5: 1~1:1 adjustable between 1 and any fixed proportion

2

    Mixing method

   Dynamic mixing

3

    Machine travel

  400*300*30mm  itinerary can be customized according to the actual needs of the customer

4

    Counter tops

     effective working area 400*300

5

    Programming mode

     Teaching programming

6

    Dimensions  

     1150*850*1600mm

7

    The main pump (A pump)

     24cc/turn(Screw pump China-German joint venture)

8

   Attached pump (B pumps)

     2。4cc/turn(Taiwan)

9

    Barrel capacity

     A Cylinder 25L,B Cylinder 10L

10

    The plastic flow

     2-15g/s

11

    A plastic head

     Single

12

    Input air pressure

     0。5-0。7Mpa

13

    Machine power

     2000W

14

    Supply voltage

     AC220V±10%,50-60HZ

                               

| Device Configuration:

1

     Control System

    Xinjie PLC + 7.2 inch Kunlun on-state touch screen

2

     Software system

Zhonghu R&D independently,a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function

3

     Operate motor

 YAKO Original motor

4

     Metering pump

 Taiwan precision adjustment wear type

5

     Cut off the system

 Zhonghu R&D independently

6

     Mixing device

 Zhonghu R&D independently

7

     Stirring motor

 OUTAI

8

     Frame material

 A3*3mm manufacture

9

     Sliding device

   Taiwan HIWIN


| Features:

1

Friendly and concise interface

Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes

2

High-end imported electronic control system

The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron.
Using the letter Jie PLC

3

Glue detection feedback function

The drum part is equipped with low level alarm function, timely remind the glue to add

4

Glue filter four protection

Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline

5

Large work surface

Can be placed at the same time a number of products, the machine automatically continuous operation, with more efficient

6

Equipment running more smoothly

The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy

7

High precision mechanical pump body

Precision adjustment wear type

8

Automatic mechanical agitation

AB glue mixing using dynamic, mechanical mixing, to ensure that the real sense of AB glue mixture,Completely put an end to dry glue, dry glue uneven phenomenon

9

High precision operation

HIWIN Linear slide


| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.


| Main features of machine

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A barrel with a mixing device to prevent precipitation and constant temperature device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, easy to clean, AB glue mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts do not have to clean, if the get off work or to stop for a period of time only filling the mixing tube to take off, Clean on the line, supplies only mixing tube.


Order:ZHU-40-30 vacuum filling machine

  • linkman
  • phone
  • email
  • verifyCode
  • Scan, focus on us

快三平台 快三平台 万发彩票 状元彩票 快三平台 状元彩票 冠军彩票 万发彩票 快三平台 恒彩彩票