Shenzhen Zhonghu Automation Equipment Co., Ltd.

Consulting Hotline0755-2728-6106

Phone number13312911695

Pipeline filling machine

Contact us

Consulting Hotline:0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen
  • ZHU-300A Pipeline filling machine

ZHU-300A Pipeline filling machine

Category:Pipeline filling machine




  • Introduction
  • Parameter

| Application: Suitable for connection with the production line

| Principle of operation:

1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, Z axis up and down movement with ball shaft screw rapid response.


| Parameters:


    Proportion with glue

  10: 1~1:1 adjustable between 1 and any fixed proportion


    Mixing method

   Dynamic mixing


    Machine travel

   680*680*100MM ,itinerary can be customized according to the actual needs of the customer


    Counter tops

 The effective working area 680*680mm


    Programming mode

     Teaching programming





    The main pump (A pump)

     9cc/turn(Taiwan)According to the use of different glue can choose a different pump


    The main pump (B pump)

     2.4cc/turn(Taiwan)According to the use of different glue can choose a different pump


    Glue power

     Bujin motor


    Tank Capacity

     A Cylinder 25LB Cylinder 10L


    A plastic flow



    A plastic head

     Number of head according to the product


    Input pressure



    Machine power



    Supply voltage



| Device Configuration:


     Control System

    Original Panasonic PLC + motion control card +7.2 inch Kunlun on-state touch screen


     Software system

Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function


     Bujin motor

 YAKO Original motor


     Metering pump body

 Taiwan Precision adjustment wear type


     Cut off the system

  Zhonghu R&D independently


     Mixing device

  Zhonghu R&D independently


     Stirring motor



     Frame material

  A3*3mm manufacture


     Sliding device

     Taiwan HIWIN

| Features:


Friendly and concise interface

Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes


High-end imported electronic control system

The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron.
Using the letter Jie PLC
All motors are overload protected.
Using high-precision motion control system


Glue detection feedback function 

In the tip of the part of the installation of imported acid and alkali visual flowmeter, you can always see the B glue is not a plastic;
The drum part is equipped with low level alarm function, timely remind the glue to add


Glue filter four protection

Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline


Flow operation

The machine automatically runs water continuously and has a higher efficiency


Equipment running more smoothly

The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy


High precision mechanical pump body

Precision adjustment wear type


Automatic mechanical agitation

AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable


High precision operation

Taiwan HIWIN

| Characteristics of Three-axis Movement:

1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.

| Main features of machine

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, easy to clean, AB glue mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts do not have to clean, if the get off work or to stop for a period of time only filling the mixing tube to take off, Clean on the line, supplies only mixing tube.

Order:ZHU-300A Pipeline filling machine

  • linkman
  • phone
  • email
  • verifyCode
  • Scan, focus on us

快三平台 快三平台 万发彩票 状元彩票 快三平台 快三平台 快三平台 万发彩票 状元彩票 恒彩彩票