Shenzhen Zhonghu Automation Equipment Co., Ltd.

Consulting Hotline0755-2728-6106

Phone number13312911695

Pipeline filling machine

Contact us

Consulting Hotline:0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen
  • ZHU-150A Pipeline filling machine

ZHU-150A Pipeline filling machine

Category:Pipeline filling machine

Description:

Hotline:0755-2728-6106

PurchasingConsultation

  • Introduction
  • Parameter

| Application: Suitable for connection with the production line


| Principle of operation:

1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, Z axis up and down movement with ball shaft screw rapid response.

 

| Parameters:

1

    Proportion with glue

  10: 1~1:1 adjustable between 1 and any fixed proportion

2

    Mixing method

   Dynamic mixing

3

    Machine travel

   680*680*100MM ,itinerary can be customized according to the actual needs of the customer

4

    Counter tops

 The effective working area 680*680mm

5

    Programming mode

     Teaching programming

6

    Dimensions

     1400*1350*1500MM

7

    The main pump (A pump)

     9cc/turn(Taiwan)According to the use of different glue can choose a different pump

8

    The main pump (B pump)

     2.4cc/turn(Taiwan)According to the use of different glue can choose a different pump

9

    Glue power

     Bujin motor

10

    Tank Capacity

     A Cylinder 25L,B Cylinder 10L

11

    A plastic flow

     2-10g/s

12

    A plastic head

     Number of head according to the product

13

    Input pressure

     0.5-0.7Mpa

14

    Machine power

     1500W

15

    Supply voltage

     AC220V±10%,50-60HZ

                                       

| Device Configuration:

1

     Control System

    Original Panasonic PLC + motion control card +7。2 inch Kunlun on-state touch screen

2

     Software system

   Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function

3

     Bujin motor

 YAKO Original motor

4

     Metering pump body

 Taiwan Precision adjustment wear type

5

     Cut off the system

 Zhonghu R&D independently

6

     Mixing device

 Zhonghu R&D independently

7

     Stirring motor

 OUTAI

8

     Frame material

 A3*3mm manufacture

9

     Sliding device

   Taiwan HIWIN

10

    Mixing tube cleaning

   Gas and liquid cleaning


| Features:

1

Friendly and concise interface

Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes

2

High-end imported electronic control system

The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron.
Using the letter Jie PLC
All motors are overload protected.
Using high-precision motion control system

3

Glue detection feedback function 

In the tip of the part of the installation of imported acid and alkali visual flowmeter, you can always see the B glue is not a plastic;
The drum part is equipped with low level alarm function, timely remind the glue to add

4

Glue filter four protection

Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline

5

Flow operation

The machine automatically runs water continuously and has a higher efficiency

6

Equipment running more smoothly

The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy

7

High precision mechanical pump body

Precision adjustment wear type

8

Automatic mechanical agitation

AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable

9

High precision operation

Taiwan HIWIN


| Characteristics of Three-axis Movement:

1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.


| Main features of machine

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, easy to clean as long as the cleaning button like.


Order:ZHU-150A Pipeline filling machine

  • linkman
  • phone
  • email
  • verifyCode
  • Scan, focus on us

状元彩票 快三平台 恒彩彩票 万发彩票 快三平台 冠军彩票 快三平台 冠军彩票 快三平台 快三平台