Shenzhen Zhonghu Automation Equipment Co., Ltd.

Consulting Hotline0755-2728-6106

Phone number13312911695

Modular filling machine

Contact us

Consulting Hotline:0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen
  • ZHU-800 LED automatic module filling machine

ZHU-800 LED automatic module filling machine

Category:Modular filling machine




  • Introduction
  • Parameter

| Application:Display module, LED drive power, capacitors, mine, the electronics industry product filling

| Principle of operation:

1, the program editor: just enter the product line spacing, the number of rows, the length of each line, the number of rows of the module, the number of rows of light cups can be.
2, the program calls: the editing program will be stored, similar products can be transferred out。
3, filling the way: irrigation head movement, the pump (stepper motor drive) for the plastic
4, the movement trajectory: straight line。 Curve。 Point。 Box。 Round。 W type, S type。 Can take any irregular trajectory。
5, Z axis up and down movement with ball shaft screw rapid response。
6, glue machine automatic ratio

| Filling speed:
1, irrigation head running speed: 0-600mm / s
2, the machine trip: 800 * 800 * 100mm,
3, for the glue speed: 0.5-20 / s (irrigation head speed and glue for the speed of the combination of irrigation speed)

| Parameters:


    Proportion with glue

  10: 1~5:1 adjustable between 1 and any fixed proportion


    Mixing method

  Dynamic mixing


    Machine travel



    Counter tops

1150*1000*30MM(Refined steel plate)


   Programming mode

     Teaching programming


    Applicable Products

     Display module, LED drive power, capacitors, mine, the electronics industry





    A pump

     Piston pump


    B pump

     Piston pump


    Barrel capacity

     A Cylinder 25LB Cylinder 10L


    A plastic flow



    A plastic head

     Standard with a mouth out of a plastic head (and then rooted in the product with plastic mouth)


    Input air pressure



    Machine power



    Supply voltage



| Device Configuration:


     Control System

   Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen


     Software system

   Zhonghu R&D independently


     Bujin Motor

   Panasonic servo motor


     Metering pump

 Taiwan precision adjustment wear type


     Cut off the system

 Zhonghu R&D independently


     Mixing device

 Zhonghu R&D independently


     Stirring motor

 Taiwan  OUTAI


     Frame material

 Steel structure


    Sliding device

   Taiwan HIWIN+Screw

   Mixing tube cleaning

   Gas and liquid cleaning
11    Flow detection

   Visual flowmeter

| Features


Friendly and concise interface

Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes


High-end imported electronic control system

The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron.
Using the letter Jie PLC


Glue detection feedback function

Flow detection equipment control B glue output,
AB glue flow alarm detection function
The drum part is equipped with low level alarm function, timely reminds the glue


Glue filter double protection

Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline


Bucket function

A bucket with a stirrer to prevent precipitation, B plastic bucket tightness to prevent evaporation


Equipment running more smoothly

The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy


High precision mechanical pump body

Precision adjustment wear type


Automatic mechanical agitation

AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable


 Sliding device

Using Taiwan HIWIN slide and screw

| Characteristics of Three-axis Movement:

1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.

| Main features of machine

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5. Easy to clean, AB glue mixing part of the mouth only the mixing tube, so the cleaning part of the mixing tube only, the other parts do not have to clean, if the get off work or to stop for a period of time only need to press the automatic cleaning button to stir Tube clean on the line, supplies only mixed tube.

6, applicable to a wide range of industries.

Order:ZHU-800 LED automatic module filling machine

  • linkman
  • phone
  • email
  • verifyCode
  • Scan, focus on us

快三平台 冠军彩票 快三平台 恒彩彩票 冠军彩票 恒彩彩票 状元彩票 快三平台 快三平台 快三平台