Shenzhen Zhonghu Automation Equipment Co., Ltd.

Consulting Hotline0755-2728-6106

Phone number13312911695

Modular filling machine

Contact us

Consulting Hotline:0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen
  • ZHU-30 LED automatic module filling machine

ZHU-30 LED automatic module filling machine

Category:Modular filling machine

Description:

Hotline:0755-2728-6106

PurchasingConsultation

  • Introduction
  • Parameter

| Application:Display panel P5, P6, P8, P10 unit plate filling


| Principle of operation:

1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line。 Curve。 Point。 Box。 Round。 W type, S type。 Can take any irregular trajectory。

 

| Parameters:

1

    Proportion with glue

   10: 1~5:1 adjustable between 1 and any fixed proportion

2

    Mixing method

   Dynamic mixing

3

    Machine travel

   680*680*30MM The trip can be customized according to the actual needs of customers

4

    Counter tops

 Countertop 1050*900,effective working area 680*680mm

5

   Programming mode

     Teaching programming

6

    Dimensions 

     1220*1050*1500MM

7

    The main pump (A pump)

     Piston pump (Zhonghu R&D independently)

8

    The main pump (B pump)

     Piston pump (Zhonghu R&D independently)

9

    For rubber power

     Bujin Motor

10

    Barrel capacity

     Cylinder A 25L,Cylinder B 10L

11

    Capacity

     P8、P10 200 pieces / hour

12

    A plastic head

     Number of head according to the product

13

    Input air pressure

     0。5-0。7Mpa

14

    Machine power

     1000W

15

    Supply voltage

     AC220V±10%,50HZ

                                       

| Device Configuration:

1

     Control System

   Xinjie PLC + motion control card +7。2 inch Kunlun on-state touch screen

2

     Software system

Zhonghu R&D independently, Domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function

3

     Bujin Motor

 YAKO Original motor

4

     Metering pump body

 Taiwan precision adjustment wear type

5

     Cut off the system

 Zhonghu R&D independently

6

     Mixing device

 Zhonghu R&D independently

7

     Stirring motor

 OUTAI

8

     Frame material

 A3*3mm manufacture

9

    Sliding device

   Taiwan HIWIN


| Features

1

Friendly and concise interface

Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes

2


High-end imported electronic control system

The main electrical part of the wiring, dust, anti-static, have reached foreign standards
Relay Omron.
Using the letter Jie PLC
All motors are overload protected.

3

Glue detection feedback function

Flow detection equipment control B glue the actual output, the accuracy of ± 0。5%
In the tip of the part of the installation of imported acid and alkali visual flowmeter, you can always see the B glue is not a plastic
The drum part is equipped with low level alarm function, timely remind the glue to add

4

Glue filter four protection

Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline

5

Large work surface

Can be placed at the same time 8 P10 workpiece, the machine automatically continuous operation, with more efficient

6

Equipment running more smoothly

The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy

7

High precision mechanical pump body

Precision adjustment wear type

8

Automatic mechanical agitation

AB glue mixing using dynamic, mechanical mixing, to ensure that the real sense of AB glue mixture, Completely put an end to dry glue, dry glue uneven phenomenon

9

High precision operation

The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations

10

Mixing tube cleaning

Gas and liquid cleaning


| Characteristics of Three-axis Movement:

1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.


| Main features of machine

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions。
2, the proportion of setting adjustment, plastic volume adjustable。 Ready to use at any time, with high precision, on-demand ratio, saving glue。
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, easy to clean, automatic cleaning, as long as the set automatic cleaning time is good。



Product parameter

Order:ZHU-30 LED automatic module filling machine

  • linkman
  • phone
  • email
  • verifyCode
  • Scan, focus on us

状元彩票 万发彩票 恒彩彩票 冠军彩票 快三平台 快赢彩票 快三平台 快赢彩票 快三平台 万发彩票